how to change vape flavours
Vaping Lifestyle

How to change vape flavours?

How to change vape flavours? The Simplest Way to Make the Switch to Vaping

Keep your vape device with the new taste until the previous one disappears if you’re the adventurous kind who doesn’t mind attempting experimental combined flavours. The new flavour will overpower the old, resulting in a mild blend.

Using Strawberry Nana or Orange Breezer and switching to mint, for example, would not be such a horrible idea.

If you don’t like mixing and prefer pure, unadulterated flavours, the coil and tank should be cleaned.

Changing the Flavors in a Vape Tank

Changing the Flavors in a Vape Tank

Unscrew your vape tank from the e-cigarette and empty any residual juice. Fill the tank halfway with hot water and a drop of dish soap. Any oils and residue inside will be broken up by the hot water and soap.

Make care to thoroughly rinse and dry with a towel. After that, let the tank dry for at least five minutes to ensure that it is entirely dry. Water should not be mixed with your juice.

Note: When cleaning your vape tank, be careful not to get water in the base of the tank; this may necessitate disassembling the tank to separate the tank components. We’re only interested in rinsing the glass portion.

Fill it with vape juice once it’s completely dry. Last but not least, dab a little e-juice on your finger and run it around the tank’s seal.

When switching flavours, do you have to change coils?

Do you suffer from vaper’s tongue? Perhaps the most recent e-juice you tested didn’t meet your expectations. Maybe you just have a wide range of tastes and enjoy experimenting with new cuisines. So, when it comes to changing flavours, do I have to change coils?

Your vape coil head will almost certainly outlast your attachment to a single flavour. If you just empty and refill your tank, however, e-liquid residue will remain, leaving a lingering flavour.

Because the majority of the residue is in the wick, changing coils is a simple solution. However, if you want to switch flavours regularly, you’ll need a lot of decent coils. That’s not just bad for your cash, but it’s also bad for the environment.

The good thing is that when switching flavours, you don’t have to change coils. There are a few options for enjoying a new e-liquid without wasting a perfectly nice coil head!

Cleaning the Coil and Wick

Remaining traces of taste build inside the vape coils since the juice is burned there. Changing your coils is a requirement if you want a total flavour refresh. You only need to change your cotton wick if you use an RDA or RBA with a custom coil build.

Coils should be changed every two weeks, so there’s no extra charge if you switch juice tastes when you complete your usual coil changes. Coils aren’t that pricey to begin with.

What if you just changed your coil a week ago and don’t want to throw away a newer coil? Simply place the coil in a zip-lock bag with the flavor’s name written on it. Switch back to that flavour the next time you want to vape it.

After you’ve changed your coil, prime it and let it sit for at least five minutes before vaping and trying out your new flavour. The priming and waiting period allows the cotton wick to absorb juice and become saturated.

Frequently Asked Questions

Is it possible to clean a vape tank with water?

Yes, but solely for the purpose of cleaning it. Cleaning your vape tank with water, as previously stated, is the greatest way to ensure that your device lasts a long time and that you always receive clean flavours with no mixing.

It should be mentioned, however, that vaping water in your device to ‘clean it’ is a complete waste of time.

Because water evaporates at a higher temperature than vape liquids, the coil will not be hot enough. You’ll essentially be vaping nothing.

If you use a mod to get your device hot enough to vape water, you’ll wind up burning your throat, mouth, and lungs, which is something you don’t want.

You should never use any liquid that isn’t expressly made for your device to vape, for example e-liquids.

How Do You Get Rid Of Vape Juice Stains?

It’s possible that cleaning your vape equipment or changing vape flavours will get a little messy. Don’t be startled if you stand up and find yourself with some on your jeans or shirt. But don’t be concerned. Vapers have developed several highly effective methods for eliminating vape stains as a result of this.

To begin, you need be aware that most stains are caused by propylene glycol (PG), which is found in several juices and causes an oily stain that appears difficult to remove. These stains, on the other hand, are easily removed with any liquid dish soap, such as Dawn. This type of soap is excellent at removing grease stains and is frequently used to clean up oil spills. This procedure works best with dry fabric, so don’t rinse the stain with water.

Apply a small amount of detergent to the stain and scrape it a few times. After that, wait a few minutes before rinsing with warm water and hanging the item to dry, or you can run the items through your washer and dryer safely now.

How to Change Flavors in a Vape Tank

Unscrew your vape tank from the e-cigarette and empty any residual juice. Fill the tank halfway with hot water and a drop of dish soap. Any oils and residue inside will be broken up by the hot water and soap.

Make care to thoroughly rinse and dry with a towel. After that, let the tank dry for at least five minutes to ensure that it is entirely dry. Water should not be mixed with your juice.

Note: When cleaning your vape tank, be careful not to get water in the base of the tank; this may necessitate disassembling the tank to separate the tank components. We’re only interested in rinsing the glass portion.

Fill it with vape juice once it’s completely dry. Last but not least, dab a little e-juice on your finger and run it around the tank’s seal.

Leave a Reply

Your email address will not be published.